Skip to content
Style and beauty, practicallyUpdated 2026-10-22
The Five Edit

Home / Fashion / How to Measure an Armhole: Depth or Curved Seam?

Green shirt body beside a separate sleeve-shaped panel and an unnumbered flexible tape.

Fashion

How to Measure an Armhole: Depth or Curved Seam?

One label can hide three different tape routes.

By The Five Edit editorial team · Published · 4 min read

To measure an armhole on a garment, first ask whether the chart wants vertical depth, a straight span or the curved seam length. Lay the garment flat without stretching and follow the chart's stated endpoints. Record the route, units and construction; never substitute one armhole dimension for another.

What does the armhole number describe?

An armhole is the opening where a sleeve joins the body, or the finished opening of a sleeveless garment. The word alone does not specify a measuring route. The University of Fashion terminology reference distinguishes the curved armscye seam from vertical depth terminology. A seller's shorthand may still use armhole for either.

Before taking out the tape, find the diagram attached to the exact product chart. Identify the upper point, the lower point and whether the line curves. If no diagram exists, ask the seller to name both endpoints and photograph the tape in place. Keep an unknown method marked unknown rather than converting it into a number that looks familiar.

Requested dimensionTape routeRecord separately
Vertical depthStraight down from the specified upper reference to the underarm levelWhich shoulder or neck point is used
Straight armhole spanDirectly between the named upper and lower pointsWhether the chart calls it a diagonal or vertical span
Curved seam lengthAlong the stated stitching lineFront only, back only or complete opening

These descriptions identify categories, not a universal chart. A manufacturer's diagram takes precedence. A front seam reading is not automatically half the complete opening because front and back shapes can differ.

Set up an existing garment

Choose a clean, dry reference garment that fits the way you want the new one to fit. Lay it on a level surface and settle the body without stretching the opening. Fasten it as the maker directs. Smooth small folds without pulling the shoulder outward to create a straighter edge.

Note whether the garment has a set-in sleeve, raglan seam, dropped shoulder or sleeveless binding. Also record whether you are measuring after normal label-compliant care. Comparing a washed reference with an unwashed new garment adds an uncertainty that the tape alone cannot remove. Our flat measurement comparison guide provides the wider record for units and garment condition.

Take depth and curved readings separately

For depth, locate the chart's specified upper reference and establish the underarm level. Keep the measurement vertical if that is what the diagram shows. Do not follow a sloping shoulder seam and call the result vertical depth. If the top of the tape starts at a neck point in one chart and the outer shoulder in another, the figures cannot be compared directly.

For a curved reading, use a flexible tape along the indicated stitching line. Work in small sections with the tape resting on the curve rather than bridging it as a straight chord. Do not stretch knit fabric to make the tape lie flat. Record where a front-only measurement stops; if the chart wants the whole opening, follow its instructions for the back section too.

Do not unpick a finished seam just to expose a line for a shopping comparison. If lining hides the relevant construction, ask for the maker's method or have a fitter inspect it. A rough estimate should be labeled as such and kept out of a precise size comparison.

Why doubling a flat reading can be wrong

Some flat widths are doubled to describe a circumference. That arithmetic does not turn a straight upper-to-underarm span into the length around a curved opening. In an illustrative record, a 23 cm straight span and a 27 cm front curve describe different routes on the same garment. Doubling 23 cm does not establish a 46 cm armscye.

Keep a paired record: “reference, front curve, shoulder seam intersection to underarm seam, 27 cm” beside “listing, armhole 23 cm, method unresolved.” The practical next step is a question to the seller, not a subtraction followed by a size verdict. This prevents a tidy spreadsheet from hiding incomparable data.

Will a deeper armhole feel more comfortable?

One dimension cannot predict the whole fit. Sleeve width, sleeve shape, shoulder position, body width and the layer worn underneath interact. Proper Cloth's jacket fit guidance discusses sleeve mobility and the contribution of chest restriction to underarm tension. It does not make depth alone a comfort rating.

Pair your measurement with an ordinary reach and seated wear check. Keep the sleeve length route and shoulder width reading on separate lines. If the garment is comfortable at rest but binds during movement, take that observation to a fitter instead of assuming that a larger armhole number fixes it.

Save a record you can repeat

Write the garment name, construction, care state, units, endpoints and route beside a photograph. Measure once more after lifting and replacing the tape. If your readings differ, inspect the setup rather than averaging two unexplained results. Save the chart diagram with the note so the same word does not become a different measurement at the next purchase.